Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Lakewood Homeowners
If your gate has stopped responding to the remote, the arm moves but the gate doesn’t, or the operator clicks and then does nothing, you’re in the right place. Electric gate repair is what we do, and it’s the only thing we do. Our technicians have up to 12 years of experience across the operators that show up most on Lakewood properties, from Mighty Mule on a residential driveway to a DoorKing operator at a small commercial lot. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a specialist to your gate without a week of waiting. We recognize your brand and hardware on sight, and the price is quoted and agreed before any work starts. Call (866) 330-9331.

Gate Opener Repair
Gate Opener Repair covers the part of the system that actually drives the gate: the operator unit, its control board, the limit settings, and the arm or chain that moves the leaf. You need it when the gate opens partway and stops, reverses for no reason, or the opener hums but nothing moves. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so we don’t guess at the control board or the limit switches. Typical gate opener repair in Lakewood runs from about $150 to $400 depending on the part and the access to the operator housing, with a written estimate before any work starts.
Control Board and Limit Diagnostics
Most opener failures trace back to a control board fault or limits that have drifted out of position. We meter the board, check the limit switches, and test the operator under load so we can tell a failed component from a misadjusted one.
Arm and Chain Replacement
A worn arm, stretched chain, or slipping sprocket makes the opener work harder than it should and eventually damages the motor. We replace the worn drive parts and reset the travel so the gate stops where it’s supposed to.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair is the broader fix for a gate that should open on its own and doesn’t: swing or slide, residential or light commercial. You need it when the gate is stuck open, stuck closed, hits the ground and reverses, or the automation fires at the wrong times. We diagnose the whole system, from the motor to the hinge, because an automatic gate is only as good as its weakest part. Automatic gate repair in Lakewood typically runs $150 to $400 depending on the fault, and we quote and agree the price before touching anything. If your gate is swinging but not latching, or sliding off its track, that’s the kind of job we handle every day.
Track and Roller Alignment
A slide gate that drags, jumps, or stops mid-travel is often a roller or track alignment problem rather than an operator fault. We check the rollers, the track, and the gate’s level so the operator isn’t fighting the gate.
Safety Reverse and Sensor Fixes
A gate that reverses on nothing, or won’t reverse when it should, is a safety sensor or photo-eye issue. We align the sensors, check the wiring, and confirm the reverse function works the way it was designed to.
Electric Gate Motor
The Electric Gate Motor is the heart of the system: it’s the motor and gearbox inside the operator that turns electricity into a moving gate. You need motor service when the gate is slow, groans, overheats, or the operator trips its breaker under load. We service motors on the nine brands we work with, including FAAC and Linear units, and we test the motor under load rather than guessing at it. A motor service or replacement in Lakewood runs roughly $250 to $700 depending on the operator and whether the motor is a separate part or built into the unit, quoted and agreed before work starts. If the motor is fine and the problem is upstream, we’ll tell you that.
Motor Load Testing
We measure current draw under load to tell a tired motor from a binding gate or a voltage problem. That keeps you from paying for a motor you didn’t need.
Gearbox and Drive Wear
Worn gears and dried lubrication make a motor work harder and run hotter. We check the gearbox, refresh the drive, and confirm the motor isn’t straining against a gate that needs adjustment.
Gate Access Control
Gate Access Control is the layer that decides who gets in: keypads, remotes, card readers, intercoms, and the receiver that ties them to the operator. You need access control service when a remote stops working, a keypad code won’t take, the intercom is dead, or you can’t add a new remote or tenant to the system. We handle access control as a core part of electric gate repair, not a referral, so we can fix the receiver, program new remotes, or sort out a keypad that won’t pair. Access control work in Lakewood typically runs $100 to $350 depending on the device, priced by written estimate before we start.
Remote and Receiver Pairing
When a remote stops working, the fault is often the receiver, a bad battery, or a lost pairing. We test the receiver, reprogram remotes, and confirm every device on the system works before we leave.
Keypad and Intercom Wiring
Keypads and intercoms fail on wiring as often as on the device itself. We trace the low-voltage run, check the connections, and replace what’s actually failed rather than swapping parts blindly.
Commercial Gate Operator
A Commercial Gate Operator is the heavier-duty unit that runs a busy entrance: an apartment lot, a small business, a gated community, or a storage yard. You need commercial service when the operator is overworked and skipping cycles, the gate is slow under traffic, or the access system and operator stop talking to each other. We work on professional-tier operators including DoorKing and BFT, and we treat commercial downtime as a real problem because a stuck gate blocks customers and tenants. Commercial gate operator repair in Lakewood runs roughly $250 to $800 depending on the operator and the fault, quoted and agreed before work begins.
Cycle Count and Duty Rating
A residential-duty operator on a high-traffic entrance wears out faster than it should. We look at how hard the operator is working and tell you if the gate needs a heavier unit.
Access System Integration
Commercial operators talk to card readers, loop detectors, and keypads. When the integration fails, we trace the wiring and the control logic so the whole entrance works again.

Brands We Service
We work on your brand, and we know where each one wears out. FAAC operators are solid but their control boards and limit settings are where most faults show up, and we’ve learned those boards inside out. BFT units are reliable commercial workhorses, but their gearboxes and drive components are what we check first on a slow or groaning gate. Linear operators show up on a lot of residential Lakewood driveways, and the receiver and remote pairing is a common failure point we handle quickly. Viking units are built to last, and their arms and hinges are where we focus on a residential system that’s stopped moving cleanly.
Whether you have a Mighty Mule on a single-leaf residential gate or a DoorKing at a commercial entrance, whether it’s a Ghost Controls DIY install or an Elite operator on a swing gate, we can help. Call (866) 330-9331 and tell us the brand and the symptom, and we’ll point you toward the right fix.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses on its own or won’t reverse at all. A safety sensor or photo-eye that fails can let a gate close on a person or vehicle. That’s a safety issue, not a convenience one, and it needs a trained technician to test and correct.
- The operator hums or clicks but the gate doesn’t move. This usually points to a failed motor, a bad control board, or a drive part that’s failed. Continuing to cycle it can burn out the motor, so stop and get it looked at.
- The gate drags, jumps, or comes off its track. A slide gate that leaves the track can fall, and a heavy panel off its rollers is a crush hazard. Keep people clear and call a specialist.
- Sparks, a burning smell, or a tripped breaker at the operator. That’s an electrical fault at the operator or its power run. Don’t reset it repeatedly; a trained technician needs to find the fault before it becomes a fire risk.
- The gate is stuck open and won’t secure the property. An open gate leaves the property exposed. We can diagnose it and get it secured, with the fix quoted before work starts.
Our Process, Step by Step
- 1
Call and describe the symptom. Tell us the brand and what the gate is doing. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a specialist out to look at it.
- 2
On-site diagnosis. We test the operator, the control board, the safety sensors, and the gate’s mechanical travel. We meter the electrical side and check the drive parts so we know what’s actually failed.
- 3
Written estimate. We explain what we found, what it takes to fix it, and give you a written price. Nothing starts until you agree to it.
- 4
Repair. We fix the fault with the right part for your operator, whether that’s a FAAC board or a Linear receiver, and we test the gate under load before we call it done.
- 5
Final check and walkthrough. We verify the safety reverse, the limits, and the access devices all work, then walk you through what we did so you know your gate is operating correctly.
How Much Does Electric Gate Repair Cost in Lakewood?
Electric gate repair in Lakewood typically runs from about $150 to $800 depending on what’s failed and which operator you have. A typical gate opener repair runs $150 to $400 depending on the control board, limit, or drive part involved. Automatic gate repair lands in the same range, $150 to $400, with the fault driving the number. Electric gate motor service or replacement runs $250 to $700 depending on the operator and whether the motor is a separate part. Gate access control work runs $100 to $350 depending on the device. Commercial gate operator repair runs $250 to $800 depending on the operator and the duty rating.
What affects the price: the brand and model of the operator, whether the failed part is a common one or a specialty board, how accessible the operator housing is, and whether the gate itself needs mechanical adjustment alongside the electrical fix. A gate that’s binding will wear out a new motor fast, so we check the mechanical side too.
How to avoid overpaying: get a written estimate before any work starts, and ask what’s included. Don’t let anyone swap a motor before testing whether the motor is actually the problem. We test under load so you pay for the part that failed, not a guess.
What’s included in a free estimate: an on-site diagnosis, a plain explanation of the fault, the parts and labor needed, and a written price. We quote and agree the price before work starts, and the written estimate sets the final price. Call (866) 330-9331 and we’ll get a specialist to your gate.
Our Service Area Near Lakewood
We cover Lakewood and the communities around it, including Wheat Ridge, Golden, Arvada, Ken Caryl, Superior, Broomfield, Louisville, Lafayette, and Erie. If you’re nearby and your gate is stuck, we can get a specialist out to look at it. For the same electric gate repair in Wheat Ridge or electric gate repair in Golden, we’re set up to help your neighbors too. Response depends on where you are and how the schedule looks that day, but fast dispatch from 7am to 7pm, Sunday through Friday, keeps the wait short. Call and tell us your address and the symptom.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Lakewood
Electric gate repair is the diagnosis and fix of the powered system that opens and closes your gate: the operator, the motor, the control board, the safety sensors, the access devices, and the wiring that ties them together. It’s different from a manual gate repair because the electrical and control side has to be tested, not just the hardware. We handle the full system, from the motor to the hinge. Call (866) 330-9331 for an exact quote, estimates are free.
Most electric gate repairs take one to two hours on site once we’ve diagnosed the fault, though a motor replacement or a control board swap can run longer. The diagnosis comes first, and we give you a written estimate before work starts. If a specialty part is needed for a FAAC or DoorKing operator, the timing depends on the part. We’ll tell you the plan up front so you know what to expect.
Typical electric gate repair in Lakewood runs from about $150 to $800 depending on the fault and the operator. Gate opener repair and automatic gate repair usually land between $150 and $400, motor work is $250 to $700, access control is $100 to $350, and commercial operator repair is $250 to $800. The written estimate sets the final price, and we quote and agree it before work starts. Call (866) 330-9331 for an exact quote, estimates are free.
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, from residential Mighty Mule systems up to commercial DoorKing units. We know where each brand tends to wear out, which saves time on diagnosis. Whether it’s a Mighty Mule or a FAAC, we can help. Call (866) 330-9331 to get your brand looked at.
Same-day service is often possible when you call and a specialist is available that day. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to look at the gate. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening. Call (866) 330-9331 and we’ll tell you the soonest we can get to your gate.
Warranty terms depend on the part and the repair, and we’ll go over them in writing with your estimate so there’s nothing unclear. We stand behind our work as a dedicated gate specialist. Ask about the specific warranty when you get your quote. Call (866) 330-9331 to talk through your repair.
Clear access to the operator housing and the gate’s travel path so the technician can test the full cycle safely. Have the gate in manual mode if it has a manual release, and note what the gate does and when it started. If you know the brand and model, have that ready; if not, we’ll identify it on site. Call (866) 330-9331 to set up the visit.
Schedule Your Electric Gate Repair Service in Lakewood Today
A gate that won’t open, won’t close, or won’t secure your property is worth fixing right. Call (866) 330-9331 for a free estimate on electric gate repair in Lakewood. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday, and the written price is quoted and agreed before any work starts. No-obligation estimate, honest diagnosis, and a dedicated gate specialist who knows your brand. We’re closed Saturday, so a call then gets booked into the next opening. Let’s get your gate working again.
Written by the team at Lakewood Gate Repair.