Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lakewood
A gate that won’t latch is a problem you notice every single time you pull out of the driveway. We fix gates in Lakewood – manual and electric, wood and chain-link, residential and light commercial – and we know this town’s older properties well enough to diagnose most problems before we arrive. Driving through Lakewood’s mid-century neighborhoods off Alameda and around the Belmar area, we see the same pattern again and again: gates hung decades ago that have slowly gone out of plumb. We’re a gate-only trade, so every call is a gate call. Call (866) 330-9331 and we’ll get a technician headed your way.
Why Lakewood Homeowners Call Lakewood Gate Repair for Gate Repair
Gates are all we do. Not fences, not garage doors, not general handyman work – gates. That focus means our technicians recognize a worn FAAC control board or a seized Viking hinge on sight, and they’ve handled enough of both to know when a fix will hold and when it won’t. Our technicians have up to 12 years of experience, and that time has been spent almost entirely on gate systems.
We work across both residential and light-commercial properties in Lakewood, which matters because the failure patterns are different. A homeowner off Wadsworth with a Mighty Mule operator has a very different problem than a property manager running a DoorKing access system on a multi-family lot. We handle both.
Response time to Lakewood is fast. We answer 24/7, and when a gate is stuck open on a property, we dispatch from 7am to 7pm, Sunday through Friday. That’s the difference between a gate that’s an inconvenience for a morning and one that’s a security problem all day.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in Lakewood
Wood Gate Repair in Lakewood often means reviving a panel that’s structurally sound but has spent forty or fifty winters expanding and contracting in the Front Range sun. The wood warps, the hinge screws loosen, and eventually the gate sags enough that the latch won’t catch. That’s the classic call here. A typical wood gate repair in Lakewood runs $150 to $450 for hardware replacement and realignment, and climbs toward $400 to $900 when posts need resetting or a section of the frame needs a fabricate-to-fit repair.
Hardware Replacement and Hinge Upgrades
Original galvanized hinges on a 1950s or 1960s gate have usually seized by now. We swap them for modern hardware rated to handle the freeze-thaw cycles this climate throws at them. That alone fixes a surprising number of “stuck” gates.
Fabricate-to-Fit Repairs
Older wood gates rarely match a standard replacement part. We fabricate braces and repair sections to fit the existing frame instead of forcing a new gate. It keeps the gate’s character and saves the cost of a full rebuild.
Driveway Gate Repair in Lakewood
Driveway Gate Repair in Lakewood is where the local climate really shows itself. A driveway gate in an older Lakewood neighborhood that swung fine in July will drag by January – cottonwood roots have heaved the hinge post, decades of freeze-thaw have loosened the footing, and the panel warps in the dry sun. A qualified technician checks the hinge post first, because a sag usually fails there, not in the panel. Resetting or replacing the footing and re-plumbing the gate typically runs $250 to $700, with operator work priced separately after the gate itself swings clean.
Post Footing and Realignment
If the post is heaved, no amount of hinge adjustment will fix the drag. We dig out the footing, reset it to proper depth, and re-plumb the gate. That’s the foundation for everything else.
Legacy Operator Retrofits
Some Lakewood gates are still running control boards from before modern entrapment-protection requirements. We retrofit safety photocells where the board supports them and recommend replacement when it doesn’t. An operator without working safety sensors is a real injury risk, so we take that seriously.
Trusted Brands We Service in Lakewood
We work on the brands that actually show up on Lakewood gates. That includes FAAC, BFT, Linear and Viking on the operator side, along with LiftMaster, Ghost Controls, Mighty Mule, Elite and DoorKing across residential and commercial systems. We don’t claim to stock every part – nobody realistically can – but we know these systems well enough to diagnose quickly and source the right replacement without guesswork. If you’ve got a Linear board that’s throwing a fault code or a BFT arm that’s stopped responding, we’ve seen it before. Fast turnaround on parts, and honest advice on whether the operator is worth fixing.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lakewood Homes
- Hinge posts heaved by roots and freeze-thaw. The mature cottonwoods and pines common in Lakewood’s older neighborhoods push roots under gate posts, and the constant freeze-thaw loosens the footing. The gate drags or latches poorly even though the panel itself is sound.
- Rusted original hinges and latches. Galvanized hardware on 1950s – 70s gates has been through decades of Front Range sun and snow. It seizes, and the gate stops swinging freely.
- Legacy operators with obsolete boards. Older electric gates around Lakewood often run control boards that no longer meet modern entrapment-protection expectations. Safety photocells either never worked or stopped working years ago.
- Warped wood panels. The dry air and intense sun warp wood gates out of square, which throws off the latch and stresses every hinge on the frame. Realignment fixes the symptom; the right hardware fixes the cause.
Pricing for Gate Repair in Lakewood, CO
Here’s what gate repair typically costs in Lakewood. Hinge and latch replacement runs $150 to $400. Gate realignment and plumb correction runs $200 to $500. Post footing reset or replacement runs $350 to $800. Weld and rust repair runs $150 to $450. Electric gate repair – operator, control board, sensors, or wiring – runs $250 to $900, with full operator replacement priced higher and quoted per system. Every price is set by a written estimate you approve before any work starts, so there are no surprises on the invoice. The estimate itself is free. Call (866) 330-9331 for an exact quote on your gate.
We Also Serve Cities Near Lakewood
Our gate repair team covers the communities around Lakewood too – Wheat Ridge, Ken Caryl, Golden and Arvada. Same gate-only focus, same brand knowledge, same honest approach to repair versus replacement. If you’re in one of those cities and your gate is dragging or your operator has quit, give us a call.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lakewood
It’s almost always the hinge post, not the panel. Cottonwood and pine roots heave the post while decades of freeze-thaw loosen the footing, so the gate sags once the ground shifts. A technician checks the post first, then re-plumbs the gate and adjusts the hardware from there. Call (866) 330-9331 for a free estimate.
It depends on the board. Many older operators can be retrofitted with working safety photocells and updated sensors if the control board supports them. When the board and motor are both obsolete, replacement is usually the cheaper long-term answer. We’ll tell you honestly which side of that line your operator falls on. Call (866) 330-9331 for a free assessment.
Yes. We work on all of those brands and more, including Viking, Ghost Controls, Mighty Mule and Elite. We’re independent and experienced with each system, so we recognize the hardware and know the common failure points. Call (866) 330-9331 with your brand and we’ll get you scheduled.
Usually, yes. If the panel is sound, a latch that won’t catch is almost always a realignment or worn-hardware issue, not a reason to replace the gate. We reset the hinge side, replace seized hardware, and get the latch catching cleanly. Call (866) 330-9331 for a free estimate.
Replace when the panel, the post footing and the operator are all failing at once, or when a legacy operator’s board can’t be retrofitted to meet modern safety expectations. Repair is the cheaper answer in most cases – realignment, hinge replacement and footing resets bring decades-old gates back to working order. We’ll give you a straight comparison before you commit. Call (866) 330-9331.
If your gate is dragging, stuck, or the operator has quit, don’t wait for it to get worse. Call (866) 330-9331 today for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We serve all of Lakewood and the surrounding Front Range communities, and we’ll tell you honestly whether your gate needs a fix or a replacement.
Written by the team at Lakewood Gate Repair.