Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Broomfield
If your gate stopped closing after the last windstorm, or the hinges on your patio-home gate are pulling out of the post again, you’re in the right place. We’re a gate-only specialist working across Broomfield, and we know this town’s gates take a beating: hail, gusts, and winters that heave the soil under every fence post. That shapes how we diagnose a repair here. We’re fluent in FAAC, BFT, Linear and Viking hardware, so when we pull up we usually recognize what’s on your gate before we touch it. Call (866) 330-9331 and we’ll talk it through.
Why Broomfield Homeowners Call Lakewood Gate Repair for Gate Repair
Gate work is the only trade we do, so the pattern recognition adds up fast. Whether it’s a Mighty Mule swing gate in a townhome court or a BFT slide operator at a light-commercial entrance, we’ve seen the failure before and know what to check first. Our technicians have up to 12 years of experience across residential and professional-grade systems.
We answer 24/7, and with fast dispatch from 7am to 7pm, Sunday through Friday, we get to Broomfield quickly. That matters when a damaged gate is standing open and the property isn’t secure. We work with homeowners and property managers alike, and the price is always quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Broomfield
Sliding Gate Repair in Broomfield most often comes down to wind. Solid-infill slide gates catch gusts along the Front Range like a sail, and that load pushes hard on the rack, the pinion and the operator. Over time the gate racks out of square, the track fills with grit and hail debris, and the operator starts to bind. What a slide repair involves here is checking the track for bend and buildup, resetting the gate’s travel, and inspecting the operator’s gearing and control board. Typical sliding gate repair in Broomfield runs $250-$700, with operator and control work at the upper end. Call for a free estimate.
Rack, Pinion and Track Wear
When a slide gate jumps or grinds, the rack and pinion is usually worn or the track has shifted out of line. We inspect the gear teeth, the track surface and the gate’s wheels, then correct alignment before the operator is stressed further.
Operator Binding After a Storm
High winds twist slide gates and stress every fitting. When the operator binds afterward, we check for a bent frame and a misaligned track before touching the motor, since a mechanical bind will burn out a healthy operator.
Wrought Iron Gate Repair in Broomfield
Wrought Iron Gate Repair in Broomfield is dominated by hail damage and rust at the welds. Decorative metal gates dent on impact, and a dent that tweaks the frame throws off the latch so the gate drags or won’t catch. Intense summer storms plus winter freeze-thaw work on the welds too, opening small cracks where rust starts. Wrought iron repair here usually means straightening the frame, re-welding stressed joints, treating rust and realigning the latch. A typical wrought iron repair in Broomfield runs $300-$850, and repair rather than replacement is the default call for hail dents. Call for a free estimate.
Hail Dent Straightening and Welds
A dented frame can usually be straightened and re-plumbed rather than replaced. We check the welds around the impact point, since hail often cracks them where it bends the metal.
Rust Treatment at Joints
Freeze-thaw cycles push moisture into weld cracks, so rust shows up at the joints first. We treat the rusted area and address the underlying weld so the repair holds through the next season.
Trusted Brands We Service in Broomfield
We’re fluent across the brands Broomfield gates actually run on, including FAAC, BFT, Viking and Linear, plus LiftMaster, Ghost Controls, DoorKing, Elite and Mighty Mule. That range covers a residential swing gate and a light-commercial operator at the same property. We don’t stock parts, so we diagnose, order what’s needed, and get the repair booked quickly rather than guessing at a part from a phone photo. If you can tell us the brand, we can usually tell you what’s likely wrong and what the fix looks like. Electric gate repair is what we do, from the motor to the hinge.
Common Gate Repair Problems We See in Broomfield Homes
- Hinge anchors pulling loose from posts. Repeated freeze-thaw cycles in Broomfield’s soil work the fasteners out of the fence post, so the gate sags and drags. Reinforcement of the post is the fix, not a new gate.
- Hail-dented metal and bent hinges. A storm bends a hinge or dents a decorative frame, and the latch stops lining up. Repairing and realigning is usually all the gate needs.
- Wind-twisted solid-infill gates. Gusts load a solid gate heavily and twist the frame, stressing welds and the slide operator’s rack. It shows up as a binding operator or a gate that won’t sit flat.
- Loose latches over shifting clay soils. Broomfield’s expansive clay heaves under the hinge post, moving it a fraction each season until the latch no longer catches. Re-plumbing the post brings the gate back into line.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Broomfield, CO
Gate repair here is priced per job, and the written estimate sets the final price before any work starts. A hinge-post reinforcement, which is the most common call in Broomfield’s patio-home and townhome communities, typically runs $200-$450. Sliding gate repair runs $250-$700, and wrought iron repairs run $300-$850 depending on how much frame straightening and welding is needed. A simple latch adjustment is the low end; operator and control-board work pushes toward the top. Zip code 80020 pricing sits in the same range as the rest of Broomfield. Estimates are free, so call (866) 330-9331 for an exact quote.
We Also Serve Cities Near Broomfield
We handle gate repair around the Broomfield area, including Superior, Louisville, Lafayette and Arvada. The same storm exposure and freeze-thaw conditions cross into these neighbors, so the work is familiar. If you’re just outside Broomfield, call and we’ll confirm coverage alongside our Gate Repair service for the wider area.
Serving Broomfield, CO – Our Local Coverage Area
We serve Broomfield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Broomfield
Freeze-thaw cycles heave the expansive clay soil around your hinge post, and each season works the fasteners a little looser until the post shifts and the gate sags. In Broomfield’s master-planned patio-home and townhome communities, the original builder-grade hinges typically pull loose after a few winters. The fix is reinforcing the hinge post, not replacing the gate. Call (866) 330-9331 for a free estimate.
Most operators have a keyed manual-release lever or a chain hoist that disengages the motor so you can cycle the gate by hand. Find your operator’s manual first and follow its release procedure for your specific brand, since the method differs between a Mighty Mule and a FAAC. Don’t force the gate against the motor. If you’re unsure which release your gate has, call (866) 330-9331.
A working automatic gate should stop and reverse when something blocks its path, and that means functioning safety photocells and, on many operators, entrapment sensors. Test by interrupting the beam while the gate moves; if it keeps going, the safety circuit needs attention. Entrapment protection is a real safety matter, so have a trained technician check it. Call (866) 330-9331 for a free estimate.
It can almost always be repaired. A dented decorative metal gate is straightened and re-plumbed, and a bent hinge or shifted latch is realigned rather than the whole gate replaced. In Broomfield, repair is the default call after a hailstorm. Call (866) 330-9331 for a free estimate.
A grinding slide gate usually has worn rack-and-pinion teeth or a track that’s shifted out of line, and wind on a solid-infill gate speeds up the wear. We check the track, the wheels and the gear teeth, then correct the alignment before the operator takes more strain. Call (866) 330-9331 for a free estimate.
What Happens When You Call
Call (866) 330-9331. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll talk through the brand and the problem, then get a technician out to look at the gate, quote the repair and agree it with you before any work starts. One call and we’ll have your Broomfield gate secure and working again.
Written by the team at Lakewood Gate Repair.