Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Erie
If your electric gate has quit, Erie, you’re probably stuck with a driveway you can’t secure or a farm entrance you have to haul open by hand. We repair electric gates across Erie, from the long rural driveways out on acreage to the newer vinyl and ornamental gates in Vista Ridge and Erie Highlands. When a gate fails out here, the culprit is often the post, not just the motor: expansive clay soils and freeze-thaw cycles move things around. Our technicians have up to 12 years of experience, and electric gate repair is what we do. Call (866) 330-9331. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key takeaways:
- We fix electric gates full-time as a dedicated gate specialist, not a handyman sideline.
- Solar-powered openers on rural Erie acreage and heavy-duty operators on wide farm gates are core work for us.
- Free estimates, and the written price is agreed before any work starts.
- We recognize your brand on sight – FAAC, BFT, Linear, Viking, LiftMaster, Mighty Mule and more.
Why Erie Homeowners Call Lakewood Gate Repair for Electric Gate Repair
Erie is one of the Front Range towns where gate work gets genuinely varied, and that’s why people call a specialist. Drive out toward the remaining acreage and you’ll find wide wooden farm gates on solar operators that need real mechanical attention. Drive through a newer subdivision and you’ll find builder-grade openers bolted to vinyl gates that were never given much margin. We handle both, because gates are the only trade we work in. That focus is what Erie customers tell us they value – someone who recognizes their hardware instead of guessing.
Property managers along the Erie corridor call us for the same reason: we don’t hand off electric gate work to a generalist. From the motor to the hinge, we diagnose the whole system. We’re fluent across nine major gate brands including FAAC, BFT, Linear and Viking, so a single visit usually means a real diagnosis rather than a return trip. We won’t quote you a made-up turnaround, but we do move quickly on Erie calls and prioritize gates that are stuck open or locked shut. The estimate is free, and the price is set in writing before we touch anything.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Operator in Erie
A commercial gate operator in Erie covers the heavier end of the spectrum: wide swing gates on acreage, slide gates at a property entrance, and access control for a small business or a multi-unit property. The job usually starts with checking the hinge post and footing depth, because a heavy gate on shifting clay will bind up even a well-matched operator. We then look at the motor, the control board, the safety loop and any keypad or entry system. A typical commercial operator repair in Erie runs $450 to $1,400, depending on the size of the gate and whether the post needs stabilizing first.
Matching the operator to the gate
A residential opener on a farm gate is a mismatch that shows up fast – repeated breaker trips, sluggish travel, a motor that overheats. Heavy gates need an operator rated for the weight and span, and a footing that stays put through a freeze-thaw season.
Access control and safety loops
Commercial entries often run a keypad, a remote receiver and a vehicle loop together. When one part fails, the gate can appear dead even though the motor is fine. We trace the whole circuit.
Gate Opener Repair in Erie
Gate opener repair in Erie is the single most common call we take, and it usually isn’t the motor that fails first. On the rural acreage, a wide wooden farm gate with a solar opener often stops mid-travel after a winter of freeze-thaw cycles. The usual cause is a post footing that has heaved, throwing the rack and pinion or swing arm out of line. A qualified pro re-levels or resets the hinge post, corrects the sag, then re-tensions the operator chain or arm and checks the safety photocells and loop. On newer subdivision gates, builder-grade openers on vinyl gates frequently fail at the hinge post after spring thaw, and the post has to be stabilized before any repair to the operator will last. Typical opener repair in Erie runs $180 to $520.
Solar openers on long driveways
Solar gate opener batteries fail early on rural Erie lots because panels get shaded by wind-blown debris and long cold snaps cut charging capacity. We size the solar setup to the operator load and check panel placement.
Control boards and undersized enclosures
Builder-grade control boards on subdivision gates corrode when freeze-thaw cycles drive moisture into undersized enclosures. The result is keypad faults and photocell errors that look like a dead operator.
Trusted Brands We Service in Erie
We work on your brand. FAAC and BFT operators on estate and acreage gates, Linear and Viking systems on residential driveways, plus LiftMaster, Ghost Controls, DoorKing, Elite and Mighty Mule across the range. Recognizing the brand matters on a diagnostic call because each one has its own failure patterns and part needs. We won’t tell you we stock a warehouse of parts, but we know what to order and how to get an Erie gate back in service without wasted trips. Whether it’s a Mighty Mule at a subdivision entry or a FAAC on a farm lane, we treat it as a gate system problem, not a motor swap.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Erie Homes
- Heaved hinge posts on clay soils. Erie’s expansive clay shifts fence posts seasonally, so gates in Vista Ridge and similar subdivisions drag or misalign at the latch after spring thaw. Stabilizing the post comes before any opener repair.
- Solar batteries giving out early. Rural Erie lots with shade and long cold snaps charge solar panels less than they need, so batteries fail sooner than expected. We check panel placement and load matching.
- Rack and pinion misalignment on farm gates. Wide wooden swing gates on acreage bind when the footing shifts, causing repeated breaker trips. A level hinge post is the fix that lasts.
- Corroded control boards and photocells. Freeze-thaw cycles push moisture into undersized enclosures on newer gates, leading to keypad and safety photocell faults. We reseal and replace as needed.
Pricing for Electric Gate Repair in Erie, CO
We price per job, so you get a written estimate before work begins – the number on that estimate is the number you pay. Typical ranges in Erie: opener repair $180 to $520, control board or keypad and remote work $150 to $400, safety photocell and sensor repair $120 to $320, and commercial operator repair $450 to $1,400. Post stabilization, footing work and heavy farm gate corrections add cost because they involve digging and re-leveling. Solar system work and battery replacement are quoted on site once we see the panel and the operator load. Estimates are free, and if a repair isn’t worth it, we’ll say so honestly. Call (866) 330-9331 for an exact quote.
We Also Serve Cities Near Erie
Our electric gate repair team covers the towns around Erie too, including Lafayette, Louisville, Superior and Broomfield. The same clay soils, wind and freeze-thaw cycles affect gates across this stretch of the Front Range, so the diagnosis patterns carry over. If you’re in one of these nearby towns, call and we’ll talk through it. You can also read more about how we serve Erie and the surrounding area.
Serving Erie, CO – Our Local Coverage Area
We serve Erie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Erie
A breaker that trips after winter usually points to a binding gate, not a bad breaker. The freeze-thaw cycle heaves the hinge post, the gate binds, and the motor draws too much current until the breaker cuts out. Call (866) 330-9331 for a free estimate before running the operator again.
Yes, a solar opener can work well on a long rural Erie driveway, provided the panel is sized to the operator and placed where trees and blown debris won’t shade it. Cold snaps reduce charging, so the battery and load need to be matched properly. Call us for a free estimate on your setup.
That seasonal drag is almost always the hinge post moving in Erie’s expansive clay soils. As the ground shifts each spring, the gate goes out of square and the latch stops lining up. Stabilizing or resetting the post usually solves it; call (866) 330-9331 and we’ll take a look.
We repair FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite and Mighty Mule operators in Erie, covering both residential and commercial gear. Recognizing the brand helps us diagnose faster and order the right parts. Call for a free estimate on your brand.
Safety photocells are standard on modern electric gates, and we recommend keeping them working on any automatic gate. If yours are faulting or missing, it’s worth fixing before the gate is used heavily. Call (866) 330-9331 – estimates are free.
If your Erie gate is stuck, dragging, or tripping the breaker, don’t wait for it to fail completely. Call (866) 330-9331 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A dedicated gate technician will diagnose the problem and give you a written price before any work starts.
Written by the team at Lakewood Gate Repair.