Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Erie
If your driveway gate is dragging, sticking, or failing to latch, the fix usually comes down to the hinge post, not the gate panel. In Erie, that distinction matters more than it does in most Front Range towns. We’re a gate-only specialist, fluent across nine major brands from Mighty Mule to FAAC, and we know which failure points show up on Erie’s newer lots and which ones don’t. Our technicians have up to 12 years of experience with gate operators, hardware, and the underground systems that serve high-end properties. Call (866) 330-9331 and we’ll set up a visit.
Why Erie Homeowners Call Lakewood Gate Repair for Gate Repair
We’ve built a clear reputation in Erie by doing one thing: gates. That means when you call about a custom ornamental swing gate with an underground operator, you get someone who has diagnosed that exact arrangement before. When you call about a builder-grade vinyl gate that won’t latch after the spring thaw, you get the same person. No guesswork, no referrals out.
Our technicians have up to 12 years of experience, and that experience covers both entry-level residential systems and professional-tier operators like BFT and DoorKing. Electric gate repair is a first-class service for us, not an add-on. That includes the motors, control boards, safety sensors, and wiring that general handymen usually decline.
Response times to Erie are solid. We answer 24/7, and we run fast dispatch from 7am to 7pm, Sunday through Friday. When we arrive on-site, we quote the job in writing and you approve it before any work starts. That’s the part people care about most.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Metal Gate Repair in Erie
Metal Gate Repair in Erie covers ornamental aluminum and steel driveway gates, custom-fabricated entries, and the heavier commercial-grade gates on light-industrial properties. The job usually involves checking hinge hardware, straightening a sagging panel, repairing welds, and treating rust before it spreads. On automated swing gates, we also verify that UL 325 entrapment protection (photo-eyes or edge sensors) is working. A typical metal gate realignment or hinge repair in Erie runs $220 – $480, while weld and rust repair on ornamental metal runs $180 – $350. Prices are quoted in writing before we touch anything.
Ornamental and Custom Fabricated Gates
Heavy ornamental gates carry a lot of weight across the hinge side, so alignment has to be exact or the panel will drift. We check post plumb and footing before adjusting the hardware. On custom entries with built-in intercom or camera systems, we also trace the low-voltage wiring so the entry system and the gate stay paired.
Underground Operators and Silent Running
Underground operators let a heavy gate open without visible hardware, and they’re common on higher-end Erie properties. They demand precise post placement and clean drainage or the operator housing will bind. We service the motors, control boards, and safety edges on these systems, so a bespoke gate keeps running quietly for years.
Wood Gate Repair in Erie
Wood Gate Repair in Erie runs the range from wooden farm gates on remaining rural acreage to cedar and stained-wood driveway gates on newer large-lot properties. The job involves bracing the frame, re-hanging sagging panels, replacing rotted pickets or hinge-side boards, and re-setting post anchors. Erie’s intense sun and fast freeze-thaw cycles warp and split wood accents quickly, so fixing the swing plane matters more than patching boards. A typical wood gate repair in Erie runs $180 – $420 depending on the scope. We quote in writing first, and you approve before any work starts.
Farm Gates and Rural Properties
On the larger lots that still hold farm gates, the work is about brace strength and hinge-post stability. We dry-fit hardware and check footing depth so the post doesn’t shift with the soil. Wooden farm gates don’t need the same tolerance as a custom ornamental entry, but they do need a strong brace or they sag within a season.
Cedar, Stained, and Accent Wood Gates
Stained-wood driveway gates take a beating from sun exposure. Warped top rails and split hinge stiles are the usual failure points. We re-hang the panel and replace the worn boards rather than talk you into a full rebuild.
Trusted Brands We Service in Erie
We work on your brand. That covers FAAC and BFT on the professional-tier side, Linear and Viking on the residential side, and every system in between. Whether it’s a Mighty Mule on a backyard gate or a FAAC on a long custom driveway entry, we recognize the hardware on sight. We don’t stock parts – every job is measured and ordered to match your operator, so the turnaround is usually a single site visit plus a scheduled return for installation. No guessing, no wrong-part callbacks.
Common Gate Repair Problems We See in Erie Homes
- Hinge post heave from expansive clay. In Vista Ridge and Erie Highlands, the clay under fence lines swells and shrinks with the seasons, lifting the hinge post and misaligning builder-grade hardware within a few years. Correcting the sag at the post rather than the panel is the fix.
- Vinyl hinge cracking and wooden gate warping. Intense sun followed by fast freeze-thaw cycles cracks vinyl hinge brackets and warps stained wood. Replacing worn hardware with components rated for high-plains wind and soil movement is the durable fix.
- Post anchor loosening on wind-exposed lots. Newer subdivisions with little established tree cover catch the downslope winds hard. Loose anchors then strain the swing gate operator, so fixing at the post is essential.
- Latch misalignment after spring thaw. When the soil shifts in spring, the panel catches on the latch instead of clearing it. A realignment fixes the swing without replacing the gate.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Erie, CO
Every gate job gets a written estimate that sets the final price, and the estimate is free. For typical range planning: hinge and post repair in Erie runs $250 – $600, gate realignment $180 – $380, lock repair $120 – $280, and weld and rust repair $180 – $350. Electric gate repair involving a control board or operator motor runs $300 – $750. What pushes a job toward the higher end is a footing that needs re-set, a custom ornamental panel that requires careful alignment, or an underground operator that needs wiring work. We visit, look at the hinge post and the hardware, and quote in writing. You approve before we start. Call (866) 330-9331 and we’ll set up a free estimate.
We Also Serve Cities Near Erie
Erie sits close to several towns where we handle the same gate work. If you’re in Lafayette, Louisville, Superior, or Broomfield and need a gate specialist, we handle those visits too. Same approach, same brands, same written quote before any work begins.
Serving Erie, CO – Our Local Coverage Area
We serve Erie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Erie
Because the gate’s hinge post is shifting with the expansive clay soil, not because the gate panel has warped on its own. In newer subdivisions, builder-grade hardware on a heaving post misaligns within a few years. A qualified pro checks the hinge-post footing and corrects the sag at the post rather than the panel. Call (866) 330-9331 for an exact quote.
A gate that strains or hesitates at the operator before the panel moves is the early warning in Erie’s exposed lots. That usually means a post anchor has loosened and the swing gate operator is fighting the misalignment. Fixing the post early saves the operator. Call (866) 330-9331 for an exact quote.
Yes. Custom ornamental gates with underground operators are a standard part of what we do. We handle the motor, control board, sensors, and wiring alongside the gate hardware, so the full entry system gets checked. We also verify that UL 325 entrapment protection is working. Call (866) 330-9331 for an exact quote.
Sag correction on the panel fixes a gate that sags but still has a plumb, solid post. A gate that drags, or whose post is visibly leaning, usually needs the hinge post addressed. We check post plumb and footing first. Call (866) 330-9331 for an exact quote.
Solar openers work fine here as long as the battery capacity matches the number of cycles per day and the panel gets clear sun. Erie’s intense sun helps, but winter is harder. The failures we see are usually undersized batteries, not the panel itself. Call (866) 330-9331 for an exact quote.
Call Lakewood Gate Repair for Your Erie Gate
We’re a dedicated gate specialist, fluent in FAAC, BFT, Linear, Viking, and every system in between. Whether your ornamental gate drags after spring thaw or your underground operator needs a control board, we’ll come look, quote it in writing, and clear it with you before any work starts. Call (866) 330-9331 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lakewood Gate Repair.