Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Lakewood?
Gate repair in Lakewood typically runs $180 to $650 for a standard residential fix, and most electric gate problems (a dead operator board, a failed sensor, a shorted control wire) land between $280 and $950. A full operator replacement climbs higher, usually $850 to $2,400 depending on the motor and gate weight. Small hardware jobs like a sagging hinge or a stuck latch sit at the low end, around $150 to $320. Every price we quote is set per job by the written estimate, and the estimate is free.
We’re Lakewood Gate Repair, a dedicated gate specialist. Gates are the only trade we work in, so every technician and every part is chosen for gate systems rather than borrowed from a general handyman’s toolkit. Our technicians have up to 12 years of experience, and they work on both manual and electric gates across the Lakewood area. Call (866) 330-9331 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard manual gate repair in Lakewood: $180 to $650.
- Electric gate and operator repair: $280 to $950, covering motors, control boards, sensors and wiring.
- Operator replacement, parts included: $850 to $2,400.
- Free estimates, upfront pricing, price set per job by the written estimate.
- We’re fluent in nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule.
Gate Repair Cost Breakdown (2026)
Here’s what the common repairs cost in Lakewood as estimates, not fixed prices. The written estimate after we look at the gate is what sets your final number.
| Repair type | Typical Lakewood range (estimate) | What it covers |
|---|---|---|
| Hinge, latch, roller or track adjustment | $150 – $320 | Realigning a sagging gate, replacing worn hardware, clearing a track |
| Gate post and footing repair | $320 – $900 | Stabilizing a leaning post, resetting hardware to proper footing depth |
| Safety sensor or photo-eye replacement | $180 – $380 | Replacing failed sensors so the gate reverses correctly |
| Control board or receiver replacement | $280 – $620 | New board, remote re-pairing, keypad and access control |
| Operator motor repair or replacement | $850 – $2,400 | New motor and operator, fitted to the gate’s weight and swing |
| Wiring and low-voltage control runs | $200 – $700 | Repairing damaged wire, correct conduit and connections |
| Full gate installation | $2,800 – $8,500 | New gate and operator, priced by size, material and access control |
A few reasons the range is this wide. Manual gates cost less to fix because there’s no motor or wiring to trace. Electric gates cost more because the job involves the operator, the control board, the safety sensors and the wiring all at once, and a diagnosis has to sort out which part is actually failing. A Mighty Mule or Ghost Controls system on a light residential gate usually prices lower than a FAAC, BFT or DoorKing operator on a heavy slide gate or a property-manager’s entry. That’s the same logic whether the system is consumer-grade or commercial, and it’s why the same “gate won’t open” symptom can produce two very different estimates.
What Affects Gate Repair Pricing in Lakewood
Five things move the number most in this market:
- Gate type and weight. A light swing gate on a residential driveway costs less to repair than a heavy slide gate or a double-leaf entry gate, because heavier panels need stronger operators, sturdier hinges and more careful alignment. Property managers with several gates should expect the heavier jobs to sit at the top of the range.
- Brand and operator tier. A Mighty Mule or Ghost Controls setup prices differently from a FAAC or BFT operator, and a DoorKing access control system on a shared entry has its own parts and diagnostics. We’re fluent in all nine of the manufacturers we work on, so we recognize the system and price it in one visit rather than guessing.
- Electric vs. manual. Electric gate repair carries a wider range because it covers the motor, control board, safety sensors and low-voltage wiring. Manual gate repair is mostly hardware and alignment.
- Age and condition of the hardware. A gate that’s been out of alignment for a while wears its hinges, latch and operator at once. Catching it early keeps the job in the lower band; waiting pushes it toward replacement.
- Access control and wiring. Keypads, remotes, intercoms and buried wire all affect the estimate. A single failed sensor is a small job; a damaged control run can be a larger one.
- Repair vs. replace. When the operator is failing and the gate is sound, repair is usually cheaper. When the gate, post and operator are all worn, replacement often pencils out better over time.
How to Save on Gate Repair
None of this needs to be expensive if the problem is caught early. A gate that drags, sticks or reverses randomly is usually one worn part away from working again, and fixing that part costs far less than fixing the motor it eventually wears out.
- Get a free estimate first. Our estimate is free, and the price is set per job by the written estimate, so you know the number before anyone starts work. Call (866) 330-9331.
- Fix the small thing before it becomes the big thing. A misaligned gate strains the operator every time it moves. Hinge and alignment repairs at the $150 to $320 end prevent the $850-plus operator replacement later.
- Keep the sensors clean and clear of plants. A dirty photo-eye reads as a fault and shuts the gate down. Clearing it is free; replacing a failed sensor is $180 to $380.
- Ask whether repair makes sense before replacing. When the gate and post are solid, repairing the operator is usually the cheaper path. We’ll tell you on site, in the estimate.
- Have the brand and model ready when you call. Knowing it’s a Linear or an Elite or a Viking operator helps us price the job in one visit.
If you’re weighing repair against replacement, our guide to gate repair walks through how we diagnose the common failures.
FAQs – Gate Repair Cost
How much does gate repair cost in Lakewood?
Most gate repairs in Lakewood run $180 to $650, and electric gate repair runs $280 to $950 depending on the operator, sensors and wiring. Operator replacement with parts runs $850 to $2,400. The exact number is set per job by the written estimate, and the estimate is free. Call (866) 330-9331 for an exact quote.
Is it cheaper to repair or replace an electric gate operator?
Repair is almost always cheaper when the gate and post are sound: a control board or sensor fix at $280 to $620 beats a new operator at $850 to $2,400. Replacement makes more sense when the motor, gate and hardware are all worn. We’ll tell you which on the estimate. Call (866) 330-9331 to book one.
How much does a new gate installation cost in Lakewood?
A full gate installation typically runs $2,800 to $8,500, priced by gate size, material, operator and access control. A light residential swing gate sits at the low end; a heavy slide gate or a commercial-grade DoorKing entry sits higher. Priced per job by the written estimate. Call (866) 330-9331 for a free estimate.
Do you charge for an estimate?
No. Our estimate is free, and the price is set per job by the written estimate after we look at the gate. There’s no service-call or diagnostic fee quoted separately. Call (866) 330-9331 to set one up. We answer 24/7.
How much does it cost to fix a gate that won’t open?
A gate that won’t open usually costs $180 to $950 to fix, depending on whether the cause is a dead remote or receiver, a failed control board, a safety sensor fault or a bad operator. Diagnosis sorts out which. Call (866) 330-9331. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Happens When You Call
We answer the phone and start narrowing the problem right there. What kind of gate is it, manual or electric, and which brand runs it? A technician is fast-dispatched from 7am to 7pm, Sunday through Friday. On site, we look at the whole system, from the motor to the hinge, because a gate that won’t close is often a sensor fault and not a motor fault. Then we write up the estimate and price it per job. No surprise add-ons after the fact.
We handle manual and electric gates, repair and installation, and we work on all nine of the major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. Whether it’s a Mighty Mule on a backyard gate or a FAAC on a property-manager’s entry, we know the system. And because gates are all we do, we recognize the failure on sight rather than guessing.
Ready for a Free Estimate?
A gate that sticks, drags, reverses or won’t move is a repair waiting to be priced. Call Lakewood Gate Repair at (866) 330-9331 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re the Lakewood Gate Repair team, and gates are the only trade we work in.
Pricing reflects the Lakewood market as of 2026. Lakewood Gate Repair offers free estimates – call (866) 330-9331.
Written by the team at Lakewood Gate Repair.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Dale Padgett"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Nicole Schaefer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Kristen Hayes