Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broomfield, CO
Gate installation in Broomfield, CO starts with the fact that most of this city was built in the 1990s and 2000s, which means the gates here are usually newer but builder-grade, and the hardware is where they fail first. Add a Front Range location in a hail and high-wind corridor, hard freeze-thaw swings every winter, and expansive clay under a lot of these subdivisions, and you get a specific set of problems: hinges pulling out of posts, latches that loosen season by season, and decorative metal that takes a beating every summer storm. We’re a gate-only company. That’s the whole trade, every day. Call (866) 330-9331 to talk through what you need.
Why Broomfield Homes Are Different
Broomfield isn’t a suburb that grew up slowly around an old downtown. It’s a master-planned city, and the housing stock shows it. The bulk of the subdivisions, townhomes and patio-home communities went in from the 1990s through the 2010s, so the gates on those properties are younger than the gates in most Front Range cities, but they were installed to a builder’s budget rather than a gate specialist’s spec. Lightweight metal and vinyl frames, standard hinges, latches set into posts with no thought given to soil movement.
That last part matters here. Broomfield’s expansive clay soil swells and shrinks with the seasons, and a gate post set in it will shift. In the patio-home and townhome communities, original builder-grade hinges often pull loose from fence posts after a few freeze-thaw seasons, and the gate starts to sag or drag before anything else looks wrong. Then there’s the weather: high wind, hail, intense afternoon thunderstorms in summer. Hail dents on decorative metal gates are common enough here that repair is usually the first call, not replacement. Winter freeze-thaw works on the same hardware from the other direction, loosening anchors and opening rust at welds. A gate in Broomfield lives a different life than a gate in a milder climate, and it needs to be looked at with that in mind.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Broomfield Services
Most calls we get from Broomfield come down to two things: a gate that’s stopped working, and a gate that needs to be replaced or installed fresh.
Gate Repair in Broomfield
Gate repair is the daily work here, and in Broomfield it skews toward storm damage and hardware fatigue rather than neglect. Bent hinges, wind-twisted frames, hail dents in decorative panels, latches that won’t catch because the post has shifted in the clay. We’ve seen enough of it to know that a gate that looks fine can be one hinge anchor away from dragging. Our technicians have up to 12 years of experience across manual and automated systems, and they’ll tell you plainly whether a repair is worth doing or whether you’re throwing money at hardware that’s already at the end of its life. For a closer look at what that involves, see our gate repair page for Broomfield.

Electric Gate Repair in Broomfield
Electric gate repair is its own discipline, and it’s one we handle directly rather than passing off. That means the operator, the control board, the safety sensors, the access control, and the wiring that ties them together. In Broomfield, where new construction and HOA-managed entrances are common, we work on a lot of automated driveway gates and community entries running FAAC and Linear operators. A gate that opens halfway and stops, or closes on a sensor and reverses, is usually a control or sensor problem, not a motor problem, and it pays to have someone who reads the fault correctly the first time. Our electric gate repair page covers the Broomfield side of that work in detail.

Gate Installation in Broomfield

Gate installation in Broomfield means something specific because of how this city was built. The 1990s-through-2010s master-planned subdivisions, townhomes and patio-home communities here went up with builder-grade gates, and those gates are now reaching the point where the hardware has taken all the freeze-thaw and hail it can. We install replacements and new gates built for that kind of punishment, and we set posts for clay soil rather than assuming it will hold. Whether it’s a Mighty Mule on a residential driveway or a FAAC operator on a community entrance, the goal is the same: a gate that lines up, swings or slides cleanly, and stays that way through a Front Range winter. If you want the full picture of what we install, start with our Gate Installation page.
Automatic Gate Installation
Signs you need it
Your manual gate has become a daily chore to open and close, or you’re adding a driveway gate to a property that’s never had one and want it automated from the start.
What it costs in Broomfield
An automatic gate installation in Broomfield typically runs from about $2,500 to $6,500, depending on gate size, material and operator, with the written estimate setting the final price.
How we do it
We measure the opening and check the grade, set the posts to proper footing depth for the soil, hang or mount the gate, then install and program the operator, safety edges and sensors, and test the full cycle before we leave.
Electric Gate Installation
Signs you need it
You’re replacing an aging operator on an existing gate, or putting in a new automated entry that needs power run to it and access control wired in.
What it costs in Broomfield
Electric gate installation in Broomfield usually falls between $2,800 and $7,500, with operator brand, power distance and access control driving the number.
How we do it
We confirm the power source and route, mount the operator to the gate and post, wire the control board, safety sensors and access control, program the limits, and run the gate through open, close and obstruction tests.
What Gate Installation Costs in Broomfield
These are typical ranges for Broomfield work. Final pricing is set per job by the written estimate you get before anything starts.
| Item | Typical range in Broomfield |
|---|---|
| Automatic gate installation (gate plus operator) | $2,500 – $6,500 |
| Electric gate installation (operator, wiring, access control) | $2,800 – $7,500 |
| Driveway or sliding gate installation (manual gate and hardware) | $1,800 – $5,500 |
Do I need a permit to install a gate in Broomfield?
Most cities require a permit for a new gate and its posts, especially when the gate is automated, so check with Broomfield’s building department before work begins. We’ll tell you what the installation involves so you can ask the right questions.
Can you match a new gate to my existing one in a Broomfield subdivision?
Usually, yes. We measure the opening, match the material and frame style, and fit hardware suited to the clay and wind here. Where an exact match isn’t available, we’ll tell you the closest match before you commit.
Brands We Service in Broomfield
We work on FAAC, BFT, Linear and Viking systems, from consumer-grade operators to professional commercial hardware, and we recognize each brand’s failure patterns on sight. We don’t claim parts on hand for every brand, so turnaround depends on what the job needs. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broomfield, CO
| Service | Typical range in Broomfield |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Electric gate installation | $2,800 – $7,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $1,800 – $5,500 |
| Gate repair (hinges, latches, alignment) | $150 – $450 |
| Electric gate repair (operator or control board) | $200 – $650 |
| Safety sensor or access control repair | $150 – $500 |
In Broomfield, price climbs with gate size, material and how much has to be corrected underground, since a post that’s shifted in the clay often means resetting rather than adjusting. The price is quoted and agreed before any work starts, so the written estimate is the number you pay.
Neighborhoods We Serve in Broomfield
We work across Broomfield, from the patio-home communities off the 80020 side of town to the newer subdivisions up toward 80023, and out to the townhome clusters where builder-grade hinges are already pulling loose. The storm-damage work tends to cluster after a hail event, so if your gate took a hit in the same round that dented your neighbors’ gates, it’s worth a call sooner rather than later. We cover the whole city, not just the center.
- Anthem
- Interlocken
- Broadlands
- Country Estates
- Willow Run
Service Area – Cities Near Broomfield
Broomfield sits between a lot of the northern Front Range, and we cover the towns around it as well. If you’re just outside the city line, we can still help. We work regularly in Superior, CO, Louisville, CO, Lafayette, CO and Arvada, CO, and the same clay soil, wind and hail patterns that shape gate work in Broomfield follow us into all of them. Call and tell us where you are.
Serving Broomfield, CO – Our Local Coverage Area
We serve Broomfield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broomfield
Yes, we cover the whole city, from the older patio-home communities through the newer subdivisions on the north side. If you’re unsure whether your address falls in our area, call (866) 330-9331 and we’ll confirm it.
Check your HOA’s architectural rules on gate style, height and material before you order anything, and ask the city about permits for posts and automation. Getting both answers first saves you from installing a gate you have to change.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Repair calls in Broomfield are usually booked the same day, while installations are measured and scheduled in advance after a free estimate.
Whether it’s a FAAC operator that’s quit on a community entrance or a builder-grade hinge that finally gave out on a Broomfield patio home, the fastest way to get a straight answer is to call. We’ll tell you what the job involves, what it’s likely to cost, and quote it in writing before any work starts. Call (866) 330-9331 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Broomfield Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Dale Padgett"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Nicole Schaefer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Kristen Hayes