Gate Repair Cost in Lakewood - What It Actually Costs, Quoted Free

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 330-9331

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Repair Cost in Lakewood?

Gate repair in Lakewood typically runs $180 to $650 for a standard residential fix, and most electric gate problems (a dead operator board, a failed sensor, a shorted control wire) land between $280 and $950. A full operator replacement climbs higher, usually $850 to $2,400 depending on the motor and gate weight. Small hardware jobs like a sagging hinge or a stuck latch sit at the low end, around $150 to $320. Every price we quote is set per job by the written estimate, and the estimate is free.

We’re Lakewood Gate Repair, a dedicated gate specialist. Gates are the only trade we work in, so every technician and every part is chosen for gate systems rather than borrowed from a general handyman’s toolkit. Our technicians have up to 12 years of experience, and they work on both manual and electric gates across the Lakewood area. Call (866) 330-9331 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Standard manual gate repair in Lakewood: $180 to $650.
  • Electric gate and operator repair: $280 to $950, covering motors, control boards, sensors and wiring.
  • Operator replacement, parts included: $850 to $2,400.
  • Free estimates, upfront pricing, price set per job by the written estimate.
  • We’re fluent in nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule.

Gate Repair Cost Breakdown (2026)

Here’s what the common repairs cost in Lakewood as estimates, not fixed prices. The written estimate after we look at the gate is what sets your final number.

Repair type Typical Lakewood range (estimate) What it covers
Hinge, latch, roller or track adjustment $150 – $320 Realigning a sagging gate, replacing worn hardware, clearing a track
Gate post and footing repair $320 – $900 Stabilizing a leaning post, resetting hardware to proper footing depth
Safety sensor or photo-eye replacement $180 – $380 Replacing failed sensors so the gate reverses correctly
Control board or receiver replacement $280 – $620 New board, remote re-pairing, keypad and access control
Operator motor repair or replacement $850 – $2,400 New motor and operator, fitted to the gate’s weight and swing
Wiring and low-voltage control runs $200 – $700 Repairing damaged wire, correct conduit and connections
Full gate installation $2,800 – $8,500 New gate and operator, priced by size, material and access control

A few reasons the range is this wide. Manual gates cost less to fix because there’s no motor or wiring to trace. Electric gates cost more because the job involves the operator, the control board, the safety sensors and the wiring all at once, and a diagnosis has to sort out which part is actually failing. A Mighty Mule or Ghost Controls system on a light residential gate usually prices lower than a FAAC, BFT or DoorKing operator on a heavy slide gate or a property-manager’s entry. That’s the same logic whether the system is consumer-grade or commercial, and it’s why the same “gate won’t open” symptom can produce two very different estimates.

What Affects Gate Repair Pricing in Lakewood

Five things move the number most in this market:

  • Gate type and weight. A light swing gate on a residential driveway costs less to repair than a heavy slide gate or a double-leaf entry gate, because heavier panels need stronger operators, sturdier hinges and more careful alignment. Property managers with several gates should expect the heavier jobs to sit at the top of the range.
  • Brand and operator tier. A Mighty Mule or Ghost Controls setup prices differently from a FAAC or BFT operator, and a DoorKing access control system on a shared entry has its own parts and diagnostics. We’re fluent in all nine of the manufacturers we work on, so we recognize the system and price it in one visit rather than guessing.
  • Electric vs. manual. Electric gate repair carries a wider range because it covers the motor, control board, safety sensors and low-voltage wiring. Manual gate repair is mostly hardware and alignment.
  • Age and condition of the hardware. A gate that’s been out of alignment for a while wears its hinges, latch and operator at once. Catching it early keeps the job in the lower band; waiting pushes it toward replacement.
  • Access control and wiring. Keypads, remotes, intercoms and buried wire all affect the estimate. A single failed sensor is a small job; a damaged control run can be a larger one.
  • Repair vs. replace. When the operator is failing and the gate is sound, repair is usually cheaper. When the gate, post and operator are all worn, replacement often pencils out better over time.

How to Save on Gate Repair

None of this needs to be expensive if the problem is caught early. A gate that drags, sticks or reverses randomly is usually one worn part away from working again, and fixing that part costs far less than fixing the motor it eventually wears out.

  • Get a free estimate first. Our estimate is free, and the price is set per job by the written estimate, so you know the number before anyone starts work. Call (866) 330-9331.
  • Fix the small thing before it becomes the big thing. A misaligned gate strains the operator every time it moves. Hinge and alignment repairs at the $150 to $320 end prevent the $850-plus operator replacement later.
  • Keep the sensors clean and clear of plants. A dirty photo-eye reads as a fault and shuts the gate down. Clearing it is free; replacing a failed sensor is $180 to $380.
  • Ask whether repair makes sense before replacing. When the gate and post are solid, repairing the operator is usually the cheaper path. We’ll tell you on site, in the estimate.
  • Have the brand and model ready when you call. Knowing it’s a Linear or an Elite or a Viking operator helps us price the job in one visit.

If you’re weighing repair against replacement, our guide to gate repair walks through how we diagnose the common failures.

FAQs – Gate Repair Cost

How much does gate repair cost in Lakewood?

Most gate repairs in Lakewood run $180 to $650, and electric gate repair runs $280 to $950 depending on the operator, sensors and wiring. Operator replacement with parts runs $850 to $2,400. The exact number is set per job by the written estimate, and the estimate is free. Call (866) 330-9331 for an exact quote.

Is it cheaper to repair or replace an electric gate operator?

Repair is almost always cheaper when the gate and post are sound: a control board or sensor fix at $280 to $620 beats a new operator at $850 to $2,400. Replacement makes more sense when the motor, gate and hardware are all worn. We’ll tell you which on the estimate. Call (866) 330-9331 to book one.

How much does a new gate installation cost in Lakewood?

A full gate installation typically runs $2,800 to $8,500, priced by gate size, material, operator and access control. A light residential swing gate sits at the low end; a heavy slide gate or a commercial-grade DoorKing entry sits higher. Priced per job by the written estimate. Call (866) 330-9331 for a free estimate.

Do you charge for an estimate?

No. Our estimate is free, and the price is set per job by the written estimate after we look at the gate. There’s no service-call or diagnostic fee quoted separately. Call (866) 330-9331 to set one up. We answer 24/7.

How much does it cost to fix a gate that won’t open?

A gate that won’t open usually costs $180 to $950 to fix, depending on whether the cause is a dead remote or receiver, a failed control board, a safety sensor fault or a bad operator. Diagnosis sorts out which. Call (866) 330-9331. Fast dispatch from 7am to 7pm, Sunday through Friday.

What Happens When You Call

We answer the phone and start narrowing the problem right there. What kind of gate is it, manual or electric, and which brand runs it? A technician is fast-dispatched from 7am to 7pm, Sunday through Friday. On site, we look at the whole system, from the motor to the hinge, because a gate that won’t close is often a sensor fault and not a motor fault. Then we write up the estimate and price it per job. No surprise add-ons after the fact.

We handle manual and electric gates, repair and installation, and we work on all nine of the major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. Whether it’s a Mighty Mule on a backyard gate or a FAAC on a property-manager’s entry, we know the system. And because gates are all we do, we recognize the failure on sight rather than guessing.

Ready for a Free Estimate?

A gate that sticks, drags, reverses or won’t move is a repair waiting to be priced. Call Lakewood Gate Repair at (866) 330-9331 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re the Lakewood Gate Repair team, and gates are the only trade we work in.

Pricing reflects the Lakewood market as of 2026. Lakewood Gate Repair offers free estimates – call (866) 330-9331.

Written by the team at Lakewood Gate Repair.

What Our Customers Say

★★★★★ 4.9 from 8+ reviews

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

- Dale Padgett

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Nicole Schaefer

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

- Kristen Hayes
Need Gate Repair help in Lakewood? Licensed & insured · within the hour response · free estimates
Call (866) 330-9331

Request a Free Estimate

Tell us what's going on in Lakewood. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7