Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lakewood, CO
If you’re looking for a gate company in Lakewood that treats gates as the whole job rather than a side line, you’re in the right place. We handle gate installation for homes and properties across Lakewood, and the work here has a particular shape to it. Most of the city’s housing went up between the 1950s and 1970s, which means gates are often hanging on decades-old posts and original hardware. Add Front Range freeze-thaw, cottonwood roots, and intense high-altitude sun, and a new gate has to be measured, set, and hung with that reality in mind. Call (866) 330-9331 for a free estimate.
Why Lakewood Homes Are Different
Lakewood’s building stock tells you a lot about what gate work here looks like. The city is mostly single-family ranch and split-level homes from the 1950s through the 1970s, many with detached garages and original wood or chain-link fencing. Plenty of those gates are still hanging on their first set of hinges. Mature landscaping is the other half of it. Cottonwoods and pines that were saplings when these houses were built now drop limbs and push roots that heave gate posts out of level. Then the freeze-thaw cycles do their work: snow, a chinook warm-up, refreeze, repeat. Wood warps, footings loosen, and galvanized latches rust from the inside. That’s why so much Lakewood gate work is re-alignment, hardware replacement, and fabricate-to-fit repair for aging wood and chain-link gates rather than a clean-slate install. It’s also why a gate that swings cleanly in July can drag or catch by January.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Lakewood Services
The two jobs Lakewood homeowners and property managers call about most are gate repair and electric gate repair. Here’s what each one involves on a Lakewood property.
Gate Repair in Lakewood
Gate repair in Lakewood is usually about correcting what the climate and time have done: sagging hinges, swollen wood, posts that have shifted, latches that no longer line up after a winter of freeze-thaw. We look at the whole assembly, from the hinge to the post footing, because a repair that ignores a heaved post will fail again by spring. Whether your gate is wood, chain-link, or ornamental metal, we diagnose the actual cause before quoting. For details, see Gate Repair in Lakewood.

Electric Gate Repair in Lakewood
Electric gate repair is a core part of what we do, not something we hand off. When an operator stops responding, the issue is often in the control board, the safety sensors, or wiring that’s taken on water and grit through Front Range winters. We’re fluent across FAAC and BFT operators as well as Linear and Viking systems, so we recognize the hardware before we open it up. A gate that opens halfway and reverses, or a remote that’s stopped working, gets the same careful diagnosis. Start with Electric Gate Repair in Lakewood.

Gate Installation in Lakewood

Gate installation in Lakewood means working with the city’s mid-century lots, not against them. Homes built between the 1950s and 1970s often come with fence lines that have shifted, root-heaved posts, and driveways that were framed decades before anyone thought about a driveway gate. We measure the actual opening, check the footing conditions, and choose hardware that will survive freeze-thaw and cottonwood roots. If you want the full rundown of how we approach gate installation, that page covers materials and process in depth.
Automatic Gate Installation
Signs you need it
You need automatic gate installation when a manual gate is too heavy or too far from the car to open comfortably, or when you want controlled access without stepping out in the cold.
What it costs in Lakewood
Automatic gate installation in Lakewood is typically quoted from $2,600 to $6,500 depending on the operator, gate weight, and whether a power run is needed, with the written estimate setting the final price.
How we do it
We measure the opening, set and level the posts to proper footing depth, hang the gate, mount and program the operator, then test the safety sensors and confirm the full open-close cycle before we’re done.
Driveway Gate Installation
Signs you need it
A driveway gate install makes sense when your property line is exposed, the driveway is wide enough for a swing or slide gate, and you want a real boundary at the curb rather than a decorative barrier.
What it costs in Lakewood
Driveway gate installation typically runs $1,800 to $5,500 in Lakewood for a manual gate, and rises with width, material, and automation, with the written estimate setting the final number.
How we do it
We confirm the driveway width and grade, choose a swing or slide configuration that fits the lot, set footings to depth, build and hang the gate, and check clearance across the full travel so it doesn’t drag once the ground shifts.
What Gate Installation Costs in Lakewood
These are typical Lakewood ranges for gate installation. Your written estimate sets the final price before any work starts.
| Item | Typical range in Lakewood |
|---|---|
| Automatic gate installation | $2,600 – $6,500 |
| Driveway gate installation (manual) | $1,800 – $5,500 |
| Sliding gate installation | $2,200 – $7,000 |
Do I need a permit to install a gate in Lakewood?
Most gate installations in Lakewood that involve footings, electrical work, or a new structure attached to a property line will require a permit from the city. Check with Lakewood’s building department before work begins. We’re happy to walk you through what a project typically involves. Call (866) 330-9331 for a free estimate.
Can you install a gate on a sloped or uneven Lakewood lot?
Yes. Sloped driveways are common on Lakewood’s older ranch lots, and we set posts to proper footing depth and adjust the gate swing or slide geometry to match the grade. The measure and written estimate come first, so you know the plan and the price.
Brands We Service in Lakewood
We work across the brands Lakewood gates actually run on, from consumer systems like Mighty Mule and Ghost Controls up to professional operators such as FAAC, BFT, DoorKing, LiftMaster, Linear, Viking, and Elite. We don’t keep parts stocked locally, so turnaround depends on the part needed, but we recognize your hardware before we open it up. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lakewood, CO
Lakewood gate pricing breaks down by job type. These are typical ranges, and the written estimate sets the final number.
| Service | Typical range in Lakewood |
|---|---|
| Automatic gate installation | $2,600 – $6,500 |
| Driveway gate installation (manual) | $1,800 – $5,500 |
| Sliding gate installation | $2,200 – $7,000 |
Price in Lakewood moves up with gate width, material choice, whether the posts need new footings because of root heave, and whether a power run or new operator is part of the job. We give you an upfront price in writing before any work starts, and that number is what you pay.
Neighborhoods We Serve in Lakewood
We install and repair gates across Lakewood, from the older ranch blocks near Belmar and the West Colfax corridor to the split-level neighborhoods around Green Mountain and the established streets near Lakewood’s southern edge. Because the city sits against the Front Range and the weather shifts fast, we run a straightforward scheduling approach: call, we quote, we book. Response across Lakewood is handled the same way regardless of neighborhood, so a gate in one part of town gets the same care as another.
- Belmar
- Green Mountain
- West Colfax
- Union Square
- Southern Lakewood
Service Area – Cities Near Lakewood
We also handle gate work in the cities around Lakewood. If you’re just outside the city line, we can quote a gate install or repair for Wheat Ridge, CO, Ken Caryl, CO, Golden, CO, and Arvada, CO. Each of those areas sees the same Front Range freeze-thaw and mature landscaping that shapes Lakewood gate work, so the approach carries over. Call (866) 330-9331 to confirm your address and get a free estimate.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lakewood
Call (866) 330-9331 and we’ll book an on-site estimate, then give you a written price before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, across Lakewood and nearby areas. Estimates are free.
Often yes. Most footings, electrical runs, or property-line structures require a city permit, and many Lakewood HOAs have their own rules on gate style and placement. Confirm both before work begins. Call us for a free estimate once you know your requirements.
We cover Lakewood and the surrounding cities, including Wheat Ridge, Ken Caryl, Golden, and Arvada. If you’re unsure whether your address is in range, call (866) 330-9331. We answer 24/7 and schedule free estimates across the area.
Ready to get your gate sorted? Call (866) 330-9331 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Lakewood Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Dale Padgett"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Nicole Schaefer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Kristen Hayes