Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Lakewood Homeowners
A gate that won’t open leaves a driveway exposed and a property looking neglected. When a gate drags, sticks, sags, or refuses to move at all, the fix is rarely the obvious part. We’re a dedicated gate specialist, and our technicians have up to 12 years of experience diagnosing exactly that kind of problem across Lakewood. We handle manual and electric gates, residential and commercial, and we know the hardware on sight instead of guessing at it. Repair work can often be scheduled the same day.

We work on your brand, from consumer systems like Mighty Mule and Ghost Controls to professional operators like FAAC and BFT. Because gates are the only trade we do, every tool and every part is chosen for gate systems, not borrowed from a general repair kit. Call (866) 330-9331 to talk through the symptoms. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
Driveway Gate Repair
Driveway Gate Repair covers the hardware that gets the most use on any property: the gate leaf itself, the hinges, the latch, the posts, and the operator that swings or slides it. You need it when the gate sags and scrapes the ground, when a hinge pulls loose from the post, or when the opener runs but the gate barely moves. We assess the whole assembly, not just the part that failed, and trace the problem back to its cause. Typical driveway gate repair in Lakewood runs $150 to $450 depending on the fault, and the written estimate sets the final price before any work starts.
Gate Alignment and Hinge Wear
Sagging gates usually trace back to a hinge that has worn or a post that has shifted in the soil. We check the plumb of the posts and the play in each hinge, then correct the cause rather than propping the gate up temporarily. Getting this right keeps the gate from scraping and keeps the operator under normal load.
Post and Mounting Repairs
A loose post lets the whole gate move, and no amount of hinge adjustment fixes that. We look at how the post is anchored and whether the footing has held, then repair or reset the mounting so the gate hangs true. This matters most on wide driveway gates where every pound of steel leans on that post.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding is the repair that saves a gate when the frame cracks, a bracket breaks loose, or a hinge tab tears off. You need it when the gate still hangs straight but has a structural break, or when a welded joint has rusted through at the bottom rail. We weld gate frames, hinge points, and operator mounting brackets, matching the repair to the thickness of the metal. Welding repairs in Lakewood typically run $200 to $550 depending on the amount of work and how much of the gate needs to come off for access. The quote is agreed before the work begins.
Frame Cracks and Broken Joints
A crack at a corner or welded joint spreads under the constant swing of the gate, so it’s worth addressing early. We clean the break back to sound metal and weld it so the frame carries load again. Small cracks rarely stay small on a gate that opens and closes several times a day.
Hinge and Bracket Reattachment
Hinge tabs and operator brackets take a lot of repeated stress, and they’re the first welded parts to fail. We reattach them with sound welds and check the alignment before finishing. This is the difference between a repair that lasts and one that tears out again in a few months.
Commercial Gate Repair
Commercial Gate Repair handles the heavier gates on apartment communities, business parks, storage facilities, and HOA entrances, including the operators that run them. You need it when an access point is holding up traffic, when a swing gate on a keypad has stopped responding, or when a slide gate is jamming under daily volume. We work on DoorKing and LiftMaster access systems as well as the heavier operators, and we treat downtime as the urgent repair it is. Commercial gate repair in Lakewood generally runs $250 to $750 depending on the operator, the access control, and the wiring involved. Pricing is quoted and agreed up front.
Access Control and Keypad Faults
When the keypad or card reader stops letting vehicles through, the gate itself is often fine and the fault lives in the control side. We check the access hardware, the control board, and the low-voltage wiring that connects them. This is work general handymen typically decline.
Operator Downtime and Traffic Flow
A commercial gate stuck open is a security matter and a small traffic jam rolled into one. We diagnose the operator, its sensors, and its power supply so the entrance gets back to normal. Getting the fault right the first time keeps the gate from failing again in the middle of a busy day.
Iron Gate Repair
Iron Gate Repair addresses the rust, bent pickets, and failing joints that show up on older iron gates over time. You need it when rust has eaten into a joint or rail, when a picket is bent after an impact, or when an ornate gate has loosened where the pieces meet. We repair iron gates on residential entries and light-commercial properties, blending structural repair with careful finishing so the gate stays true to its design. Iron gate repair in Lakewood usually falls in the $175 to $500 range depending on the damage. You’ll have a written estimate before we start.
Rust and Corrosion Repair
Rust on an iron gate rarely stays surface-level; once it reaches a joint, it weakens the connection. We strip and treat the affected area, weld or reinforce where needed, and finish it so moisture stops getting back in. Catching it early keeps a small patch from turning into a structural problem.
Bent and Broken Pickets
Impact damage bends pickets and loosens them at the top and bottom rails. We straighten or replace where repair isn’t the right call and re-secure the pieces so the gate reads as a whole again. The goal is a gate that looks original, not a patchwork.
Sliding Gate Repair
Sliding Gate Repair covers the track, the rollers, the guide wheels, and the operator on a gate that travels sideways rather than swinging. You need it when the gate binds halfway, jumps the track, drags at the bottom, or comes off its rollers entirely. We check the track for wear and debris, the rollers for flat spots, and the operator for strain from any of it. Sliding gate repair in Lakewood typically runs $180 to $600 depending on whether the problem is mechanical or in the operator. The price is set by the written estimate before any work begins.
Track and Roller Alignment
Most sliding gate trouble starts with a track that has shifted or a roller that has flattened. We check the level of the track and the condition of each roller, then correct the alignment before it loads the operator. A badly aligned gate will destroy motors that were working fine.
Gates That Jump the Track
A gate that jumps the track is a genuine safety issue, especially on an electric slide gate, where heavy panels can crush if the gate moves unexpectedly. We check the guide system and the stops, and we recommend keeping the operator’s power isolated until a technician has looked at it. Heavy automated gates aren’t something to troubleshoot by hand.
Wrought Iron Gate Repair
Wrought Iron Gate Repair focuses on the detail work that keeps an ornamental gate looking sharp and swinging smoothly. You need it when the scrollwork has cracked at a weld, when a decorative element has broken loose, or when rust is creeping through the finish on a gate you want to keep. We repair wrought iron with an eye on the design, matching repairs to the original structure rather than welding on whatever’s handy. Wrought iron gate repair in Lakewood usually runs $180 to $500 depending on the extent of the cracks and finish work. The written estimate sets the final price.
Cracked Scrolls and Ornamental Welds
The thin, decorative parts of a wrought iron gate are the first to crack under vibration. We weld those areas carefully so the repair holds without changing how the gate looks. Matching the original shape matters on a gate that’s part of the property’s look.
Finish and Protective Coating
Bare metal invites rust, and paint on a wrought iron gate wears in the places people touch most. We prep the surface and apply a finish so the protection lasts. It’s less about cosmetics and more about stopping the next round of corrosion.
Metal Gate Repair
Metal Gate Repair covers the broad range of steel and aluminum gates that don’t fall neatly into the iron category: tubular steel driveway gates, aluminum slide gates, and light industrial entrances. You need it when a steel gate has bent, a latch has failed, or the frame has stressed where the operator bolts on. We work on aluminum and steel alike, and we know where each one tends to fail. Metal gate repair in Lakewood typically ranges from $150 to $500 depending on the material and the damage. You’ll get the price in writing before any work starts.

Bent Frames and Alignment
A bent tube frame on a metal gate is easy to spot but harder to bring back true. We assess whether straightening will hold or whether a section needs replacing. Getting the frame accurate keeps the gate from fighting the operator with every cycle.
Latch and Hardware Failures
Latches wear out faster than the gate itself, and a stuck latch can leave a property exposed. We repair and align the latch and hardware so the gate closes cleanly and stays shut. A small hardware repair beats a bigger one down the line.
Wood Gate Repair
Wood Gate Repair handles the swelling, sagging, and hinge pull-out that wood gates deal with as the seasons shift. You need it when a gate has swollen in the wet months, when the hinges have pulled away from soft wood, or when the bottom rail is rotting where it meets the ground. We repair wood gates with hardware and joints suited to the material, and we know when a repair will hold versus when a section needs replacing. Wood gate repair in Lakewood typically runs $150 to $400 depending on the extent of the damage. The estimate is quoted and agreed before work begins.
Seasonal Swelling and Sagging
Wood moves with moisture, and Colorado’s dry spells and wet spells push a gate in both directions. A gate that sticks in one season and swings free in another needs its hinges and gaps corrected, not just forced. We set the gate so it works through the range of the year.
Hinge Pull-Out and Rot Repair
When hinges pull loose from a wood gate, the wood around them is usually the real problem. We repair or substitute sound wood so the hardware has something to bite into. Leaving it alone lets the gate hang further and further from true.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service FAAC equipment and know where it wears out: the operator gears, the limit switches, and the control board. FAAC systems handle residential and light commercial gates well, and the common failures follow patterns we recognize. We also service BFT operators, and we have a clear read on how their control logic and safety sensors behave under heavy daily use. When a BFT system throws a fault, the answer usually sits in the sensor and wiring rather than the motor itself.
Linear gate operators show up on a lot of driveways around Lakewood, and we know their control boards and access hardware inside out. Viking systems, too: their heavy-duty operators are reliable, but failures at the power and sensor side still happen and we can trace them. We work on LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule as well, which means whether you have a FAAC system or any other make, we can help.
Signs You Need a Pro Right Now
- The gate stops mid-travel. A gate that halts partway through its swing or slide suggests a failing limit switch, a strained operator, or an obstruction the safety sensor is reading. It’s worth diagnosing before the motor takes the strain.
- The gate jumps or comes off the track. On a sliding gate, rollers that have flattened or a track that has shifted cause this. A heavy panel that comes off the track is genuinely dangerous, and the operator should stay powered down until a technician looks at it.
- Visible sparks, a burning smell, or a tripped breaker. Electrical faults in an operator or its wiring are a safety concern and should be handled by a trained professional rather than traced by hand. Don’t reset a breaker repeatedly on a fault you can’t explain.
- A hinge has pulled loose or the post is shifting. A gate hanging off a loose hinge or moving post will eventually fall or damage the operator. The sooner it’s corrected, the less of the gate needs repair.
- The keypad or remote stops working. Access control failures often live in the wiring or the control board, not the gate. We diagnose the full access system so the fix is right the first time.
Our Process, Step by Step
- 1
Call and describe the symptoms. Tell us the brand if you know it and what the gate is doing. This often lets us narrow the likely fault before we arrive. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
- 2
On-site diagnosis. We check the gate structure, the hardware, and the operator, using the right diagnostic tools to read the control board and test the sensors and wiring. We’re not guessing at the failure; we’re finding the cause.
- 3
Written estimate. You get a clear, written price for the repair before any work starts. If the diagnosis turns up something more, we talk it through with you and re-quote before we proceed.
- 4
Repair. We carry out the repair on the gate structure, the operator, the access control, or the wiring as the job requires. Every part and tool is chosen for gate work, so we don’t make do.
- 5
Test and walk-through. We cycle the gate, check the safety sensors, and confirm the access control works as it should. You get a straightforward rundown of what we fixed and how to keep the gate healthy.
How Much Does Gate Repair Cost in Lakewood?
A typical gate repair in Lakewood runs $150 to $450 for mechanical issues like hinges, alignment, latches, and minor structure. An operator or electrical fault on an electric gate usually runs $250 to $750 once the motor, control board, sensors, or wiring are involved. Gate welding and structural work fall in the $200 to $550 range, and commercial gates sit at the higher end of each band because of the volume and the access control.
Several things move that number: whether the gate is manual or electric, the brand and the availability of the right parts, how much structural work is needed, and whether the operator has to be removed for access. You avoid overpaying by getting a written estimate before any work starts, by having the fault diagnosed properly rather than guessed at, and by addressing small issues early.
Our free estimate includes the on-site diagnosis, a clear explanation of the fault, and a written price for the repair. The written estimate sets the final price, so there’s no surprise on the invoice.
If you’ve already had one repair on the same fault and it keeps coming back, it’s worth a second look at the root cause before spending again. Call (866) 330-9331 to get an exact quote. Estimates are free.
Our Service Area Near Lakewood
We work across Lakewood and the surrounding communities. If you’re just outside the city, gate repair in Wheat Ridge and Golden are within easy reach, and we also cover Ken Caryl, Superior, Broomfield, Louisville, Lafayette, Erie, and Arvada. Dispatch runs from 7am to 7pm, Sunday through Friday, and our response time varies with location and the time of day. Start with Lakewood Gate Repair for the main overview.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Lakewood
Gate repair is the work of diagnosing and fixing the parts of a gate and its operator that stop it from working: hinges, latches, posts, tracks, rollers, motors, control boards, sensors, and wiring. It covers manual and electric gates, residential and commercial, and it’s the only trade we do. We handle gate repair across Lakewood and the surrounding area.
Most straightforward repairs take one visit, and some can often be done the same day. Repairs involving a commercial operator, an access control fault, or structural welding may need more time for the right parts. When you call, we’ll tell you what to expect based on the symptoms.
Typical gate repair in Lakewood runs $150 to $450 for mechanical work, and $250 to $750 for electric gate or operator faults. Welding and structural repairs usually fall in the $200 to $550 range. The written estimate sets the final price, and estimates are free. Call (866) 330-9331 for an exact quote.
Yes. We service FAAC and BFT operators, along with LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means whether your gate is a residential Mighty Mule or a commercial-grade FAAC, we recognize the hardware and know where it fails.
Same-day repairs are often possible, and we dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7; a call outside dispatch hours is booked into the next opening. We’re closed on Saturday.
Warranty and guarantee terms are set per job and confirmed in your written estimate. We’ll go over the details before any work starts so you know exactly what’s covered. Ask when you call and we’ll spell it out.
Make sure the gate area is clear and accessible, and have any remotes, keypad codes, or access cards on hand. If the gate is electric and behaving unpredictably, keep the operator powered down until a technician arrives. Describe any sounds or symptoms when you call; it helps us come prepared.
Schedule Your Gate Repair Service in Lakewood Today
A sticking gate or a dead operator is worth fixing now, before the damage spreads. Our dedicated gate technicians know your brand and can trace the fault. Call (866) 330-9331 for a free, no-obligation estimate. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. For new gates, see gate repair and gate repair in neighboring areas, or our electric gate repair and gate installation options.
Written by the team at Lakewood Gate Repair.